Toshiba Portege Z930 Series User Manual Download

Page: 55 / 138

If you are using Gigabit Ethernet LAN (1000 megabits per second,

1000BASE-T), be sure to connect with a CAT5e cable or higher. You

cannot use a CAT3 or CAT5 cable.
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-

TX), be sure to connect with a CAT5 cable or higher. You cannot use a

CAT3 cable.
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you

can connect with a CAT3 or higher cable.

Connecting the LAN cable

To connect the LAN cable, follow the steps as detailed below:

Connect the AC adaptor before connecting the LAN cable. The AC

adaptor must remain connected during LAN use. If you disconnect the

AC Adaptor while the computer is accessing a LAN, the system may

hang up.
Do not connect any other cable to the LAN jack except the LAN cable.

Otherwise, malfunctions or damage may occur.
Do not connect any power supplying device to the LAN cable that is

connected to the LAN jack. Otherwise, malfunctions or damage may

occur.

1. Turn off the power to all external devices connected to the computer.

2. Plug one end of the cable into the LAN jack. Press gently until you

hear the latch click into place.

Figure 3-4 Connecting the LAN cable

1. LAN jack

2. LAN cable

3. Plug the other end of the cable into a LAN hub connector or router.

Check with your LAN administrator and hardware or software vendor

before using or configuring a network connection.

Optional devices

Optional devices can expand the computer's capabilities and its versatility.

This section describes the connection or installation of the following

devices:

PORTÉGÉ Z930/Satellite Z930 Series

User's Manual

3-18

Summary of Contents for Portege Z930 Series











































































































































Search results

Summary of Contents for Portege Z930 Series

Reviews:

Related manuals for Portege Z930 Series

Brands by name

Popular brands

Toshiba Portege Z930 Series, User Manual

Search results

Summary of Contents for Portege Z930 Series

Reviews:

Related manuals for Portege Z930 Series

Brands by name

Popular brands