Toshiba Portege Z930 Series User Manual Download

Page: 49 / 138

Fingerprint Authentication Procedure

1. Start up the computer.

2. The Logon Authorization screen is displayed. Choose any of the

enrolled fingers and swipe the fingerprint on the sensor. If

authentication is successful, the user will be logged on to Windows.

If the fingerprint authentication fails, please logon using the Windows

logon password.
A warning message will be displayed when authentication is abnormal

or authentication is not successful within a fixed duration.

Fingerprint Pre-Boot Authentication and Single Sign-

on feature

Overview about Fingerprint Pre-Boot Authentication

The fingerprint authentication system can be used to replace the keyboard

based User Password authentication system when booting up.
If you do not want to use the fingerprint authentication system for password

authentication when booting up, but prefer to use the keyboard-based

system instead, click the user’s tile when the Fingerprint System

Authentication screen is displayed. This will switch the password input

screen across to the keyboard-based one.

You must ensure that you use the TOSHIBA Password Utility to

register a User Password before using the Fingerprint Pre-Boot

Authentication and its extended function to allow fingerprints to be

used to access the computer when it is turned on.
When swiping your finger, please ensure that you do it slowly and at a

constant speed. If you find that this does not improve the

authentication rate, you should try to adjust the speed at which the

finger is swiped.
If there are any changes in the environment or settings related to

authorization, you will be required to provide authorization information

such as a User Password (and, if applicable, the HDD (Hard Disk

Drive) password).

Overview about Fingerprint Single Sign-on feature

This is a feature that allows the user to complete the authentication for both

the User/BIOS Password (and, if applicable, the HDD (Hard Disk Drive)

Password) and logging onto Windows using only one fingerprint

authentication when booting up.
It is necessary to register the User/BIOS Password and Windows Logon

Password before using the Fingerprint Pre-Boot Authentication and this

Fingerprint Single Sign-On Feature. Please use the TOSHIBA Password

PORTÉGÉ Z930/Satellite Z930 Series

User's Manual

3-12

Summary of Contents for Portege Z930 Series











































































































































Search results

Summary of Contents for Portege Z930 Series

Reviews:

Related manuals for Portege Z930 Series

Brands by name

Popular brands

Toshiba Portege Z930 Series, User Manual

Search results

Summary of Contents for Portege Z930 Series

Reviews:

Related manuals for Portege Z930 Series

Brands by name

Popular brands