AccuPoint
A pointer control device located in the center of
the keyboard is used to control the on-screen
pointer.
Please refer to the
AccuPoint
section for details
Computer holder
The holder provides firm support to the computer.
Hooks
Hooks secure the physical connection between
the computer and the keyboard dock.
Docking connector
Connects to the computer.
Eject button
Begins the computer’s disconnect sequence.
Once the eject button is pressed and the
computer cannot communicate with external
devices connected to the keyboard dock. Undock
and re-dock the computer to re-establish
communication.
DC IN 19V jack
The AC adaptor connects to this jack in order to
power the computer and charge its internal
batteries. Please note that you should only use
the model of AC adaptor supplied with the
computer at the time of purchase - using the
wrong AC adaptor can cause damage to the
computer.
LAN jack
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). Refer to
Operating
Basics
, for details.
Do not connect any cable other than a LAN cable to the LAN jack. It
could cause damage or malfunction.
Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
External RGB monitor
port
This port provides 15-pin, analog RGB port.
Please refer to the
External RGB monitor port pin
assignment
section for information on external
RGB monitor port pin assignment. This port
allows you to connect an external RGB monitor
to the computer.
User's Manual
3-9
