Toshiba Portege S100 Series, Maintenance Manual

Page: 207 / 402

3.31 SETUP 3 Tests and Diagnostics
The Ring Indicator is displayed only when the computer is in Resume mode
and this function cannot be used for a PC card-type modem. When any
modem is not installed, it is not displayed.
The Wake-up on LAN is a function to turn on the power automatically by the
call from the administrator. It can be set to “Enabled” only when “Built-in
LAN” is set to “Enabled”. To activate this function, use the AC adapter.
NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Resume is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
(f) Language During Bootup
This option selects the language during bootup. This message appears only on
the model for TCL(Canada).
English The message is displayed in English. (Default)
French The message is displayed in French.
9. Configuration
This option displays the configuration method.
(a) Device Config.
The devices are initialized when the PNP OS loads.
Setup by OS First, devices necessary for loading the OS will be
initialized. After the PNP OS loads, the OS will
initialize other devices. In this case, setup of PC Cards
will be fixed to “Auto-Selected,” and cannot be
changed. (Default)
All Devices All devices will be initialized.
NOTE: When using installed OS, selecting “Set by OS” is recommended. But, when
setting “PC CARD-Controller Mode” to other than “ Auto-Selected”, select
“ All Devices”.
PORTEGE S100 Maintenance Manual (960-508) 3-109