Toshiba Portege M300 Maintenance Manual Download Page 166

Page: 166 / 380

3.24 Floppy Disk Drive Utilities

3 Tests and Diagnostics

3-54

PORTEGE M300 Maintenance Manual (960-504)

3.24.2 Operations

Selecting

from the DIAGNOSTIC MENU and pressing

Enter

displays the following

message:

[ FDD UTILITIES ]

1 - FORMAT
2 - COPY
3 - DUMP
4 – HDD-ID READ
9 - EXIT TO DIAGNOSTICS MENU

FORMAT program

(a)

Selecting FORMAT displays the following message:

DIAGNOSTICS - FLOPPY DISK FORMAT : VX.XX
Drive number select (1:A, 2:B) ?

(b)

Select a drive number to display the following message:

Type select (0:2DD, 3:2HD) ?

(c)

Select a media/drive type number and press

Enter

. A message similar to the one

below will be displayed:

Warning : Disk data will be destroyed.
Insert work disk into drive A:
Press any key when ready.

(d)

Remove the Diagnostics Disk from the FDD, insert the work disk and press any
key.

The following message will be displayed when the FDD format is executed:

[ FDD TYPE ] : TRACK = XXX
[ FDD TYPE ] : HEAD = X
[ FDD TYPE ] : SECTOR = XX

Format start

[[track, head = XXX X]]

After the floppy disk is formatted, the following message will appear:

Format complete
Another format (1:Yes/2:No) ?

(e)

Typing

displays the message from step (c) above. Typing

returns the test to the

DIAGNOSTIC MENU.

Summary of Contents for Portege M300





























































































































































































































































































































































































Search results

Summary of Contents for Portege M300

Reviews:

Related manuals for Portege M300

Brands by name

Popular brands

Toshiba Portege M300, Maintenance Manual

Search results

Summary of Contents for Portege M300

Reviews:

Related manuals for Portege M300

Brands by name

Popular brands