User’s Manual
12-3
Additional Information
Cannot access the
Internet.
The connecting using a
specified cellular
phone connection
cable was not correct.
Check whether the
connecting using a
specified cellular
phone connection
cable is correct.
Radio waves of a
connected cellular
phone are getting
worse.
Carry out
communications where
radio wave conditions
are satisfactory.
Setting is incorrect.
Carry out correct
setting.
Following message is
displayed. “NOT
ENOUGH BATTERY
POWER. USB devices
can not be used.
Because PDA’s battery
power is low.”
The Battery power is
too low to use USB
devices.
Charge the battery or
connect AC adapter.
Following message is
displayed.
“TOO MUCH USB
CONNECTION.
Connecting USB
devices are too much.”
The total power
consumption of
connected USB
devices is too large.
This USB port supports
total 500mA USB
device. Confirm
connected USB
device.
Following message is
displayed.
“USB OVER
CURRENT DETECT
USB device is turned
off. Please disconnect
USB device.”
The total power
consumption of
connected USB
devices is too large.
This USB port supports
total 500mA USB
device. Confirm
connected USB
device.
To enable USB port
again, turn off the
power of Pocket PC or
push Reset Switch.
Symptom
Cause
Correction