Toshiba Pockey PC e800 User Manual Download

Page: 167 / 223

User’s Manual

11-12

Optional Functions

Making a Backup

Before performing the backup or restore operations, do the following;

■

Check that there is enough space in the main unit’s memory and on the

storage device. If the storage device does not have enough free space,

you cannot save the backup data. The backup data is saved as a file

named backup.dat on your storage device.

■

Make sure the main unit’s power is off when loading and unloading the

CF/SD card.

■

Save current data in the main unit’s memory before backing it up on the

storage device.

1. To make a backup to the CF/SD card, insert a CF Card or SD Card.

Make sure to do so in the proper direction.

2. Tap

Start

Programs

, and then

DataBackup

to display the DataBackup

screen shown below.

Data such as the password in

Settings

cannot be restored.

The data stored in the Flash ROM disk cannot be backed up.
Before backing up or restoring data, stop other applications, and connect

the AC adapter to the Toshiba Pocket PC e800.
If you make a backup to the CF/SD card or Flash ROM Disk using the

DataBackup Utility, please

DO NOT:

remove the CF/SD card, reset the

device, and/or turn off the device’s power until the backup is completed.
If you restore the data from the CF/SD card or Flash ROM Disk by

DataBackup Utility, please

DO NOT:

remove the CF/SD card, reset the

device, and/or turn off the device’s power until the restore is completed.
Failure to follow any of the above procedures may result in the loss of data.

Summary of Contents for Pockey PC e800
































































































































































































































Search results

Summary of Contents for Pockey PC e800

Reviews:

Related manuals for Pockey PC e800

Brands by name

Popular brands

Toshiba Pockey PC e800, User Manual

Search results

Summary of Contents for Pockey PC e800

Reviews:

Related manuals for Pockey PC e800

Brands by name

Popular brands