User’s Manual
11-34
Optional Functions
Normal View
Normal view allows you to view the current slide in the upper pane, while
still able to navigate slides conveniently using the lower thumbnail pane.
You can drag the Splitter Bar that divides the two panes up or down, to
adjust the screen distribution above and below the splitter. The
Normal
View
icon is located at the leftmost side of the Toolbar, as shown below.
You can also use the stylus to pan the slide image in the upper pane to
show the part covered by the lower pane. The splitter position will
automatically be remembered across multiple application sessions, freeing
you from having to adjust the splitter position again during the current IA
Presenter session.
To display a different slide in the upper pane, simply tap on the desired
thumbnail in the lower pane, or use the Slide Title Bar (unnamed slides will
be represented by a number in the Slide Title Bar drop-down list). The
lower thumbnail pane in Normal view provides slide navigation. If you want
to select multiple slides for further operations, use the Slide Sorter view, as
explained in the next section.
You can project the currently selected slide to VGA Display by activating
the
VGA Slide Toggle
command on the View Menu, or by tapping the
VGA
Slide Output Toggle
icon at the rightmost side of the Toolbar. To end the
projection, select the command again to toggle it off.
Slide Sorter
Slide Sorter view fills the entire application space with either large or small
thumbnails, depending on whether
Large Thumbnail
or
Small Thumbnail
is active on the View Menu. You can select:
■
One slide by tapping on it, or
■
Multiple adjacent slides by dragging your stylus over them, or
■
If you select Multiple Select Mode on the Edit Menu, you can tap, drag,
or a combination thereof, to select multiple slides that are separated.
Selected slides will be highlighted by a different border color.
You can project an individual slide to the VGA output by activating the
VGA
Slide Toggle
command on the View Menu, or by tapping the VGA Slide
Output Toggle icon at the rightmost side of the Toolbar. When you activate
this function:
■
If one slide is selected at the time you toggle the VGA Slide Output “on,”
that slide will be output to the VGA Display.
■
If multiple slides happen to be selected, the first selected slide in the
sequence will be output to the VGA Display.
■
If no slides are selected, there is no change to the current status of the
VGA Display. That is, if an image is already displayed on the VGA
Display, that image remains until you select a slide on your LCD screen
for projection.
To end the projection and return to viewing the slide only on your mobile
device’s screen, just select the command again (or tap the icon a second
time) to toggle it off.