User’s Manual
11-13
Optional Functions
3. Tap
Backup
from
Functionality
, and select the storage destination.
4. Tap
Start
. The screen for confirming that other applications have ended
appears.
5. To display the Backup password input screen, tap
OK
.
6. Enter a password. You can enter a password up to a maximum of 16
characters. Backup can be made even without entry of a password. If a
password is entered, that password is required at the time of restore.
7. When finished, tap
OK
. The progress bar is displayed during the
backup process. When the backup is completed, the backup finish
message appears. The backup time that is displayed on screen is the
time that the backup was started.
8. Tap
OK
to return to the previous screen.
9. Tap
Exit
to close the DataBackup screen.
Tap to select:
All: All files stored in the main
memory, registry, and database.
PIM data: Pocket Outlook data
(Contacts, Calendar, and Task).
Tap to select
Backup
.
Tap to select the storage destination.
If you forget the password, you cannot restore the backup data. Do not
forget your password. Write down the password and keep it in a safe place
where only you know.
The backup process will stop if the storage device becomes full before
completing the backup. Before starting the backup, check the remaining
storage device capacity.
If the storage card is write-protected, you cannot save the backup data.
Cancel the write-protection before starting the backup.
Backups can also be made periodically. For more information, see “
Backup files are always overwritten.
