Toshiba PNE001Z, Function Manual

Page: 36 / 63

E6582051
- 33 -
5.5.12.
fc91
(Alarm code)
bit
Function
0 1
Remarks
(Code displayed on
the panel)
0 Over-current alarm Normal Alarming
c
flicking
1 Inverter over load alarm Normal Alarming
l
flicking
2 Motor over load alarm Normal Alarming
l
flicking
3 Over heat alarm Normal Alarming
h
flicking
4 Over voltage alarm Normal Alarming
p
flicking
5 Main circuit under voltage alarm Normal Alarming -
6 main device overheat alarm Normal Alarming
l
flicking
7 Under current alarm Normal Alarming -
8 Over-torque alarm Normal Alarming -
9 Braking resistor overload alarm Normal Alarming -
10 Cumulative operation hours alarm Normal Alarming -
11 Option communication alarm Normal Alarming -
12 Serial communication alarm Normal Alarming -
13 MOFFMS (MS relay off or MOFF) Normal Alarming -
14 Stop after instantaneous power off -
Dec., Under
stop Refer to
f302
value
15 Stop after LL continuance time -
Dec., Under
stop Refer to
f256
value
5.5.13.
fd06
(Input TB Status)
bit TB Name Function (Parameter) 0 1
0 F Input terminal function selection 1 (
f111
)
OFF ON
1 R Input terminal function selection 2 (
f112
)
2 RES Input terminal function selection 3 (
f113
)
3 S1 Input terminal function selection 4 (
f114
)
4 S2 Input terminal function selection 5 (
f115
)
5 S3 Input terminal function selection 6 (
f116
)
6 VIB*1 Input terminal function selection 7 (
f117
)
7 VIA*1 Input terminal function selection 8 (
f118
)
5 to 15 (Undefined) - - -
Note: The bit described "Undefined" is unstable. Do not use the bit for the judgment.
*1: VIA/ VIB are input terminal function when
f109
is logic input.
*The input terminal function is selected by each parameter.
5.5.14.
fd07
(Output TB Status)
bit TB Name Function (Parameter) 0 1
0 RY-RC Output terminal function selection 1A (
f130
) OFF ON
1 OUT Output TB Function select 2A (
f131
) OFF ON
2 FL Output TB Function select 3 (
f132
) OFF ON
3 - 15 (Undefined) - - -
Note: The bit described "Undefined" is unstable. Do not use the bit for the judgment.