manualshive.com logo in svg

Toshiba PNE001Z, Function Manual

Share
Download
Toshiba PNE001Z Function Manual Download Page 13

 

E6582051 

- 10 - 

 

2. Hardware Setup 

When using the PNE001Z with VF-S15, sold separately VF-S15 option adapter (SBP009Z) is required. 

 

2.1. 

Mounting and removing 

 

Warning

 

 

 

Mandatory 

action

 

▼ 

The mounting/removing of option must be performed without supplying power(Turn off all 
input power, wait at least 15 minutes, confirm that the charge lamp of inverter is no 
longer lit). The inverter and option can become damaged. 

▼ 

Do not use tool for the mounting/removing of option . The inverter and option can become 
damaged.

 

 

2.1.1. 

Mounting of option 

①

  Insert option into option adapter. 

 
 
 
 
 
 
 
 
 
 
*Note: Mount option adapter to inverter after option insertion. 

Insert the option straightly and slowly along the guide inside option adapter. Follow this instruction, 
the connecter can become damaged. 

 

②

  Remove the option connector                                                   

➂

  Lock the control terminal cover. 

cover on control terminal cover. 

 

 

 

 

 

 

 

 

 
④

  Hang the hook of option adapter on the control terminal cover. 

Insert the connector in the direction of arrow   

 

 

 

 

 

 

 

SBP009Z 

PNE001Z 

Hook 

Summary of Contents for PNE001Z
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands