Toshiba OIS-DS/Smart, Function Manual

Page: 47 / 60

3. Basic Specification
33
Connection PLC Specification
Table 3.4 - 3.9 shows the connection PLC Specification supported by the function of PLC.
Table 3.4. Toshiba Integrated Controller L1
*1)
Item Specifications
Supported Model Integrated Controller L1(model1000, EN531T)
Communication System pcmp
Collection (input) Data PB,PV,LP,R, and W registers
Write(output) Data Write in a tag
*1) Not supported onWindows 10
About the information of L1, please refer to ‘6F8C1050 PLC Connection Function L1 Programming
Manual’
Table 3.5. One loop controller LC531/LC532
Item Specifications
Supported Model One loop Controller LC531/LC532
Communication System Pcmp
Collection (input) Data PB,PV,LP,R, and W registers
Write(output) Data Not used
Set Data Not used
Collection(input)
Parameter Not used
L1/LC53* function is registered with the nV-Tool.
Display parameter for L1/LC531 tag is registered with the PLCS engineering tool .
Table 3.6. Toshiba Integrated Controller S2
Item Specifications
Supported Model Integrated controller S2(model2000 EN651A)
Communication System pcmp
Collection (input) Data Max.960 words (use of D register)
It sets up by PLC configuration registration of an PLCS engineering tool.
Write(output) Data use of D register
It sets up by tag registration of an engineering tool.
Set Data Max.480 words (use of D register)
It sets up by PLC configuration registration of an PLCS engineering tool.
Collection(input)
Parameter
Max.960 words (use of D register)
It sets up by Parameter configuration of an PLCS engineering tool.