Toshiba MW14F51 Owner'S Manual Download Page 52

Page: 52 / 72

Advanced playback (DVD)

Press AUDIO SELECT during playback.

The current soundtrack language will
appear.

Press AUDIO SELECT repeatedly until the desired
language is selected.

• The on screen display will disappear after a few

seconds.

Changing soundtrack language/
Subtitles

You can select the language when you play a multilin-
gual disc.

Notes:

• If the desired language is not heard after pressing the

button several times, the language is not recorded on the disc.

• Changing soundtrack language is cancelled when you

open the disc tray. The initial default language or available
language will be heard if the disc is played back again.

• If you select DTS in playing DTS-encoded disc, no sound

will be heard from the TV/VCR/DVD’s speakers.

In case of Video CD playback

Audio type changes as follows each time you press

AUDIO SELECT

1/8 Eng Dolby Digital

2/8 Fra Dolby Digital

AUDIO SELECT

When playing back a disc recorded with subtitles, you can
select the subtitle language or turn the subtitle off.

To turn off the subtitle, press SUBTITLE until
“Off” appears.

• The on screen display will disappear after a

few seconds.

Notes:

• Depending on the DVD, you may not be able to change

subtitles, or to turn subtitles on or off.

• While playing a DVD, the subtitle may change when you

open or close the disc tray.

• In some cases, a selected subtitle language may not be

changed immediately.

Off

Subtitles

Press SUBTITLE repeatedly during playback until
your desired language appears.

1/8 Eng

Changing soundtrack language

DVD

VCD

SUBTITLE

5T90101A [E]p49-53

3/8/05, 10:26 AM

Summary of Contents for MW14F51









































































Search results

Summary of Contents for MW14F51

Reviews:

Related manuals for MW14F51

Brands by name

Popular brands

Toshiba MW14F51, Owner'S Manual

Search results

Summary of Contents for MW14F51

Reviews:

Related manuals for MW14F51

Brands by name

Popular brands