Toshiba MW14F51 Owner'S Manual Download

Page: 49 / 72

Ad
v

anced pla

ybac

k (D

VD)

[Audio CD, Video CD, MP3/WMA/JPEG CD]
Press

to select “Repeat”.

Press

to select “Track” or “All”.

The unit automatically starts repeat
playback after finishing the current
track.

• If you set the repeat mode during stop mode,

press

PLAY

to start Repeat playback.

Press REPEAT A-B during playback.

The start point is selected.

A-B repeat playback allows you to repeat material between
two selected points.

Notes:

• In A-B Repeat mode, subtitles near the A or B locations may

not be displayed.

• You cannot set the A-B Repeat for the scenes that include

multiple angles.

• A-B Repeat playback does not work when Repeat playback is

activated.

• You may not be able to set A-B Repeat, during certain scenes

of the DVD.

• A-B Repeat does not work with an interactive DVD.
• A-B Repeat is prohibited when PBC is on.

To resume normal playback

Press

REPEAT A-B

again.

“

Off

” appears on the screen.

Repeat playback

A-B Repeat playback

PLAY MODE

REPEAT A-B

▼

Repeat playback/A-B Repeat playback

Press PLAY MODE during playback or stop mode.

Press PLAY MODE again to make the screen
disappear.

Notes:

• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, repeat functions are prohib-

ited during playback.

[DVD]
Press

to select “Chapter” or “Title”.

The unit automatically starts repeat
playback after finishing the current title
or chapter.

To resume normal playback

Select Repeat : “Off” in step 2.

PLAY

Press REPEAT A-B again.

The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, re-
turns to Point A automatically, then
starts again.

DVD
VCD

A B

DVD
VCD

Repeat

Off

/Play Mode

5T90101A [E]p49-53

3/8/05, 10:26 AM

Summary of Contents for MW14F51









































































Search results

Summary of Contents for MW14F51

Reviews:

Related manuals for MW14F51

Brands by name

Popular brands

Toshiba MW14F51, Owner'S Manual

Search results

Summary of Contents for MW14F51

Reviews:

Related manuals for MW14F51

Brands by name

Popular brands