43
Other functions (VCR)
To VIDEO IN
To AUDIO (L) OUT
Audio/Video cable (not supplied)
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
Recording VCR
Duplicating a video tape
If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before
turning on the power.
Duplicating a video tape
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
Audio/Video cable (not supplied)
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Recording VCR
To AV Jack
Playback Camcorder
Connection with Camcorder
Press SPEED to select the desired tape speed
SP or SLP.
It is recommended that you set the
Speed to the SP mode on the
recording VCR for best results.
1
Press INPUT to select AUDIO/VIDEO input
position.
2
Press PLAY on the playback VCR or camcorder.
3
Press REC.
4
Press STOP after duplicating a video tape.
5
Preparation:
• Press
TV/VCR
to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Load a previously recorded tape into the playback
VCR or Camcorder.
LINE
To AUDIO (R) IN
To AUDIO (L) IN
Note:
Unauthorized recording of copyrighted television programs, films,
video cassettes and other materials may infringe the rights of
copyright owners and be contrary to copyright laws.
Connection with second video recorder
TV/VCR
INPUT
STOP
REC
SPEED
Other functions (VCR)
5T90101A [E]p43-44
3/8/05, 10:25 AM
43