Toshiba MW14F51 Owner'S Manual Download

Page: 35 / 72

Playback (VCR)

Cassette tape playback

To play a prerecorded tape.

Load a prerecorded tape:

(When loading a cassette tape without the erase
prevention tab, playback will start automatically).

Press

PLAY

on the front panel or on

the remote.
Playback will start. “

” will appear

on the screen for about 4 seconds.

Press

STOP/EJECT

once on the front

panel or press

STOP

on the remote.

The tape will stop but remain fully
loaded and ready to play.
“

” will appear on the screen for

about 4 seconds.

To stop playback:

Stop the playback or recording with

STOP

To stop the tape-winding, press

STOP

. To switch to play-

back directly (without

STOP

), press

PLAY

Notes:

• If you play a prerecorded tape after the DVD playback, you

must set the unit to TV/VCR mode using the TV/VCR button.

• This unit selects the playback tape speed SP or SLP auto-

matically.

• When you select the TV/VCR mode during DVD playback, DVD

playback will change to the still mode, and after 5 minutes it
will change to the resuming playback mode automatically.

To start playback:

Playback

Rewind or forward the tape

To rewind the tape:

Press

REW

on the front panel or press

REV

on the remote.

To forward the tape:

Press

on the front panel or press

on the remote.

Forward/Reverse picture search mode

When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press

REV

again and hold it down. The unit will resume the tape

winding as soon as the button is released.

TV/VCR

REV

STOP

PLAY

REW

STOP/EJECT

FF PLAY

5T90101A [E]p34-38

3/8/05, 10:25 AM

Summary of Contents for MW14F51









































































Search results

Summary of Contents for MW14F51

Reviews:

Related manuals for MW14F51

Brands by name

Popular brands

Toshiba MW14F51, Owner'S Manual

Search results

Summary of Contents for MW14F51

Reviews:

Related manuals for MW14F51

Brands by name

Popular brands