MR-2012 DISASSEMBLY AND REPLACEMENT
6 - 6
October 2000 © TOSHIBA TEC
Note:
Mount ADF feed guide assembly with mylar
on exit pinch roller up.
Fig. 6-21
[J] ADF feed motor assembly
1. Remove document tray assembly.
(See Fig. 6-3 to 6-5)
2. Remove ADF top cover assembly.
(See Fig. 6-9)
3. Remove ADF feed guide assembly.
(See Fig. 6-19 and 6-20)
4. Detach one connector from platen sensor, and
release the harness of ADF feed motor assem-
bly from the clamp.
5. Remove one screw and detach the ground wire.
Fig. 6-22
6. Remove 3 screws, release timing belt 166, and
remove ADF feed motor assembly.
7. Remove tension spring 2.
Fig. 6-23
ADF feed guide
assembly
Mylar
Exit pinch roller
Ground wire
Screw
Connector
Platen sensor
Harness
Clamp
Tension spring
Screw
ADF feed
motor assembly
Timing belt 166
Screw
179
180
181
