MR-2012 DISASSEMBLY AND REPLACEMENT
6 - 2
October 2000 © TOSHIBA TEC
4. Remove one screw and remove document tray
support.
5. Detach document tray support from the harness.
6. Move document tray assembly in the direction
of the arrow and remove it.
Fig. 6-5
[C] Document tray cover
1. Remove ADF. (See Fig. 6-1 and 6-2)
2. Remove document tray assembly. (See Fig. 6-3
to 6-5)
3. Remove 3 screws and detach document tray
cover.
Fig. 6-6
[D] Document width sensor assembly
1. Remove ADF. (See Fig. 6-1 and 6-2)
2. Remove document tray assembly.
(See Fig. 6-3 to 6-5)
3. Detach document tray cover. (See Fig. 6-6)
4. Release the harness from the clamp and de-
tach the document length sensor harness.
5. Remove one screw, release the hook, and re-
move document width sensor assembly.
Fig. 6-7
Notes: 1. Align the arrow (
↑
) mark of sensor
holder with that of document guide gear.
2. Align the cut part of document guide rack
with the triangle mark ( ) of document
guide gear.
Fig. 6-8
Document tray
assembly
Document
tray support
Screw
Screw
Document
tray cover
Screw
Clamp
Clamp
Document width
volume assembly
Harness
Document guide
rack
Sensor holder
Document
guide gear
Document guide
rack
164
165
166
167
