– 65 –
FILE NO. SVM-
16041
�
In case of wired remote controller (RBC-AMT32E)
1. Confirmation and check
When a trouble occurred on the air conditioner,
the check code and the indoor unit No. are
displayed on the display section of the remote
controller.
The check code is displayed while the air
conditioner operates.
If the display disappeared, operate the air
conditioner and check the error based upon the
following “Confirmation of error history”.
2. Confirmation of error history
When a trouble occurred on the air conditioner,
the error history can be confirmed with the
following procedure.
(Up to 4 error histories are stored in memory.)
This history can be confirmed from either
operating status or stop status.
Check code
Indoor unit No. in which
an error occurred
3
2
1
SET
TIME
TIMER SET
TEST
FILTER
LL
RESET
TEMP.
CL
FAN
SAVE
A
A
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
T
Procedure
1
2
3
Description
When pushing
SET
and
TEST
buttons simultaneously for 4 seconds or more, the below display appears.
If [ Service Check] is displayed, the mode enters in the error history mode.
• [01: Error history order] is displayed in CODE No. window.
• [Check Code] is displayed in check code window.
• [Indoor unit address with error] is displayed in UNIT No.
Every pushing temp. set
/
buttons, the error histories stored in the memory are displayed in
order. The numbers in CODE No. indicates CODE No. [01] (Latest) to [04] (Oldest).
CAUTION
Do not push
CL
button because all the error histories of the indoor unit will be deleted.
After confirmation, push
TEST
button to return to the usual display.
How to read the check monitor display
<7-segment display>
8
9
A
b
C
d
E
F
H
J
L
P
7
6
5
4
3
2
1
0
<How to read>
�
In case of central remote controller (TCB-SC642TLE2)
1. Confirmation and check
When a trouble occurred on the air conditioner, the check code and the indoor unit No. are displayed on
the display section of the remote controller.
The check code is displayed while the air conditioner operates.
If the display disappeared, operate the air conditioner and check the error based upon the following
“Confirmation of error history”.
2. Confirmation of error history
When a trouble occurred on the air conditioner, the error history can be confirmed with the following
procedure. (Up to 4 error histories are stored in memory.)
This history can be confirmed from either operating or stop.
1) Push
and
SET
buttons in succession for 4 seconds or more.
2) SERVICE CHECK
goes on and Item code 01 goes on.
3) When selecting (flash) the group number if there is the alarm history, the UNIT number and the latest
alarm history are displayed alternately.
* In this time, the temperature cannot be set up.
4) To confirm the alarm history other than the latest one, push temp. set
/
to select Item
code (01 to 04).
5) To confirm the alarm in the other group, push
ZONE
and
GROUP
to select the group number
Do not push
CL
button because all the alarm histories of the currently selected group are deleted.
6) To finish the service check, push
button.
UNIT No.
Alternate flashing display
R.C
No.
Unit No display
Alarm display
UNIT No.
Alternate flashing display
R.C
No.
Unit No display
Alarm display
SELECT
ZONE
CL
SET
GROUP
CODE
No.
UNIT No.
No.
R.C.
TEST
ZONE
ALL
ZONE
GROUP
SETTING
1234
SET DATA
