12-EN
Installation Manual
–12–
Toshiba 1112750201 (EN)
272
560
670
580
Mounting directly on the fl oor
1) Fix the leg of indoor unit on the fl oor with 2 mounting
screws.
2) Fix the upper part of indoor unit on the wall with 4
mounting screws.
Installation on the wall
1) Fix the installation plate on the wall with 4 mounting
screws.
2) Hook the indoor unit on the installation plate.
3) Fix the upper part of indoor unit on the wall with 4
mounting screws.
CAUTION
Make sure to fi x it at a designated position with the
screws.
Failure may result the damage of piping by the turning
over of a set.
Concealed installation
1. Wall hole size
Wall hole size should be enough to keep the distance
with indoor unit as shown in the following fi gure.
2. Installation using the supporting plate
• To install into the existing wall hole, if it is
impossible to keep 20-30 mm of depth, use the
supporting plate for securing the distance.
• Arrange the screw positions and supporting plate
as shown in the fi gure.
• Be sure to switch to wall burying mode.
(Rear screws potion)
(Field supply)
: Screw holes
(Field supply)
(Unit : mm)
300 or more
300 or more
Indoor unit
(Front view)
300 or more
1300 or more
(700)
9
00 or more
100 or less
Floor
Wall
(Side view)
(Unit : mm)
(Side view)
Cut dot-line area
(Wall installation)
230
150
10
15
15
40
288
670
1000 mm or less
4 screw
(M4 x 25L)
4 screw
(M4 x 25L)
Slit
6 screw
(M4 x 25L)
(Floor installation)
Floor
Wall
(600)
NOTE
• In case the plinth is fi xed to the wall, please make
sure to cut out the slit on the left and right side of the
main part.
Summary of Contents for MML-AP0074NH-E
Page 2: ......