18
TOSHIBA 1108150401_EN
EN
4
Insert the upper portion of air filter
confirming to fit its right and left edges
on the indoor unit until it is firmly set.
5
Close the air inlet grille.
Cleaning the air inlet grille
(1) Remove the air inlet grille.
Hold the two sides of the air inlet grille and open upwards.
Move the center arm to the left and remove the grille.
(2) Wash it with water using a soft sponge or towel.
(Do not use metallic scrubbing brush or other hard brushes.)
•
Use of such hard objects will cause scratches on the surface of
the grille, and the metal coating to peel off.
•
If very dirty, clean the air inlet grille with a neutral detergent for
kitchen use, and rinse it off with water.
(3) Wipe out water from the air inlet grille and dry it.
(4) Fit the left and right arms of the air inlet grille to the shafts on the
two sides of the air conditioner and push in completely, and then
push in the center arm.
(5) Check that the center arm has been completely inserted and close
the air inlet grille.
•
Push the arrow locations (four) at the bottom of the air inlet grille
to check whether the grille is completely closed.
Filter holder
01(EN)_1108150401 P15-20
05.1.17, 12:21
18
