9
TOSHIBA 1108150401_EN
EN
AUTOMATIC OPERATION
If you select this function in a system with no auto-changeover (cooling/heating) control setting, disagreement
in operation mode occurs.
Change the operation mode with the MODE button on the wireless remote control. (
see page 3.)
When you set the air conditioner in AUTO mode, it will automatically select cooling, heating, or fan only operation
depending on the room temperature.
In addition, fan speed and flap are automatically controlled.
Start
1
1
1
1
1
AUTO button (AUTO)
Press AUTO button.
•
The
lamp (green) on the display panel of the indoor unit lights.
The operating mode is selected in accordance with the room
temperature and operation starts after approximately 3 minutes.
•
If the AUTO mode is uncomfortable, you can select the desired
conditions manually.
Temperature, fan speed and flap position can be changed.
When fan speed or flap position is changed, MODE is also
changed from AUTO to A.
At the same time, fan speed and flap positioning indications are
indicated.
Stop
START/STOP button
Press this button to stop the air conditioner.
AUTOMATIC OPERATION (AUTO CHANGEOVER)
If you select this function in a system with no auto-changeover (cooling/heating) control setting, disagreement
in operation mode occurs.
Change the operation mode with the MODE button on the wireless remote control. (
see page 3.)
When you set the air conditioner in A mode or switch over from AUTO operation because of some settings change,
it will automatically select cooling, heating, or fan only operation depending on the room temperature.
Start
1
1
1
1
1
START/STOP button
Press this button to start the air conditioner.
2
2
2
2
2
Mode select button (MODE)
Select A.
3
3
3
3
3
Temperature button (
)
Set the desired temperature.
•
The
lamp (green) on the display panel of the indoor unit lights.
The operating mode is selected in accordance with the room
temperature and operation starts after approximately 3 minutes.
•
When you select the A mode, it is unnecessary to set the fan speed.
The FAN speed display will show
and the fan speed will be
automatically controlled.
•
If the A mode is uncomfortable, you can select the desired
conditions manually.
Stop
START/STOP button
Press this button again to stop the air conditioner.
PRESET
FAN
MODE
Hi-POWER
ON
OFF
SET
CLR
ECO
AUTO
TIMER
CLOCK CHECK
RESET
FILTER
START/STOP
FIX
MEMO
SWING
AUTO
1
PRESET
FAN
MODE
Hi-POWER
ON
OFF
SET
CLR
ECO
AUTO
TIMER
CLOCK CHECK
RESET
FILTER
START/STOP
FIX
MEMO
SWING
A
3
1
2
01(EN)_1108150401 P08-13
05.1.17, 12:20
9
