background image

– 5 –

Owner’s Manual

EN-9

EN-10

Operation

• Before opening the intake grille of the indoor unit or service panel 

of the outdoor unit, set the circuit breaker to the OFF position. 
Failure to set the circuit breaker to the OFF position may result in 
electric shocks through contact with the interior parts. Only a 
qualified installer or qualified service person is allowed to remove 
the intake grille of the indoor unit or service panel of the outdoor 
unit and do the work required.

• Inside the air conditioner are high-voltage areas and rotating parts. 

Due to the danger of electric shocks or of your fingers or physical 
objects becoming trapped in the rotating parts, do not remove the 
intake grille of the indoor unit or service panel of the outdoor unit. 
When work involving the removal of these parts is required, contact 
a qualified installer or a qualified service person.

• Do not move or repair any unit by yourself. Since there is high 

voltage inside the unit, you may get electric shock when removing 
the cover and main unit.

• Use of a stand more than 50 cm high to clean the filter of the indoor 

unit or to carry out other such jobs constitutes working at heights. 
Due to the danger of falling off the stand and injuring yourself while 
working at heights, this kind of work should not be done by 
unqualified individuals. When this kind of work must be carried out, 
do not do it yourself but ask a qualified installer or a qualified 
service person to do it for you.

• Do not touch the aluminum fin of the outdoor unit. You may injure 

yourself if you do so. If the fin must be touched for some reason, first 
put on protective gloves and safety work clothing, and then proceed.

• Do not climb onto or place objects on top of the outdoor unit. You may 

fall or the objects may fall off of the outdoor unit and result in injury.

• Do not place any combustion appliance in a place where it is 

directly exposed to the wind of air conditioner, otherwise it may 
cause imperfect combustion.

• When the air conditioner is operated with a combustion appliance 

in the same place, be careful of ventilation to let fresh air enter the 
room. Poor ventilation causes oxygen shortage.

• When the air conditioner is used in a closed room, be careful of 

sufficient ventilation of the room. Poor ventilation causes oxygen 
shortage.

• Do not expose your body to cool air directly for a long time and do 

not cool yourself excessively. Doing so may result in deteriorated 
physical condition and ill health.

• Never insert your finger or a stick into the air intake or discharge. 

Doing so may result injury as the fan is rotating at high speed 
inside the unit.

• Consult the shop where you purchased the air conditioner if air 

conditioning (cooling and heating) is not performed properly as a 
refrigerant leakage may be the cause. Confirm the repair details 
with a qualified service person when the repair includes additional 
charging of the refrigerant.

• Be sure to stop running the air conditioner and turn off the breaker 

before cleaning. Otherwise, injury may result as the fan is rotating 
at high speed inside the unit.

Repairs

• When you have noticed that some kind of trouble (such as when an 

error display has appeared, there is a smell of burning, abnormal 
sounds are heard, the air conditioner fails to cool or heat or water is 
leaking) has occurred in the air conditioner, do not touch the air 
conditioner yourself but set the circuit breaker to the OFF position, 
and contact a qualified service person. Take steps to ensure that 
the power will not be turned on (by marking “out of service” near 
the circuit breaker, for instance) until qualified service person 
arrives. Continuing to use the air conditioner in the trouble status 
may cause mechanical problems to escalate or result in electric 
shocks, etc.

• If you have discovered that the fangard is damaged, do not 

approach the outdoor unit but set the circuit breaker to the OFF 

2FAN_OM_DB04307201-04_EN.book  Page 5  Tuesday, December 17, 2019  6:33 PM

Summary of Contents for MCY-MHP0806HS8-E


























Reviews: