Toshiba MCY-MHP0806HS8-E Owner'S Manual Download Page 4

Page: 4 / 25

– 3 –

Owner’s Manual

EN-5

EN-6



Warning Indications on the Air Conditioner Unit

Warning indication

Description

WARNING
ELECTRICAL SHOCK HAZARD

Disconnect all remote electric
power supplies before servicing.

WARNING

Moving parts.
Do not operate unit with grille
removed.
Stop the unit before the servicing.

CAUTION

High temperature parts.
You might get burned when
removing this panel.

CAUTION

Do not touch the aluminum fins of
the unit.
Doing so may result in injury.

WARNING

ELECTRICAL SHOCK HAZARD

Disconnect all remote
electric power supplies
before servicing.

WARNING

Moving parts.
Do not operate unit with grille
removed.
Stop the unit before the servicing.

CAUTION

High temperature parts.
You might get burned
when removing this panel.

CAUTION

Do not touch the aluminum
fins of the unit.
Doing so may result in injury.

CAUTION
BURST HAZARD

Open the service valves before
the operation, otherwise there
might be the burst.
Refrigerant recovery during
operation is prohibited.

CAUTION
Do not climb onto the top side.

Doing so may result in injury.

CAUTION

BURST HAZARD

Open the service valves before
the operation, otherwise there
might be the burst.

Refrigerant recovery during
operation is prohibited.

CAUTION

Do not climb onto the

top side.

Doing so may result in injury.

2FAN_OM_DB04307201-04_EN.book Page 3 Tuesday, December 17, 2019 6:33 PM

Summary of Contents for MCY-MHP0806HS8-E


























Search results

Summary of Contents for MCY-MHP0806HS8-E

Reviews:

Related manuals for MCY-MHP0806HS8-E

Brands by name

Popular brands

Toshiba MCY-MHP0806HS8-E, Owner'S Manual

Search results

Summary of Contents for MCY-MHP0806HS8-E

Reviews:

Related manuals for MCY-MHP0806HS8-E

Brands by name

Popular brands