manualshive.com logo in svg

Toshiba Magnia 3310, User Manual, Page: 290 / 335

Share
Download
Toshiba Magnia 3310 User Manual Download Page 290

  290

SW1 Location on motherboard

Preset jumper switch settings

                          
                          
                         

 

 

                        
                       

1. CMOS clear:       Data in the flash memory is cleared if the 
                             server is started with this switch in the “ON” 
                             position.
2. Not used:             Do not change the setting.
3. Not used:             Do not change the setting.

4. Password clear:   The password is cleared if the server
                               is started with this switch in the “ON” 
                              position.

Summary of Contents for Magnia 3310
















































































































































































































































































































































Reviews:

No comments