Toshiba M6-ST3412 User Manual Download Page 189

Page: 189 / 286

189

If Something Goes Wrong

Problems when you turn on the computer

5.375 x 8.375 ver 2.3

To record the details:

Click the Details button and select the text the operating
system displays.

The Details button displays information that the software
manufacturer needs to help you solve your problem.

Press

Ctrl

and

simultaneously to copy the text to the

clipboard.

Open Notepad (click Start, All Programs, Accessories
and then click Notepad).

Press

Ctrl

and

simultaneously to paste the details into

Notepad.

Add a paragraph break and type some notes describing
what you were doing when you received the message and
how the error can be reproduced.

Save the file and refer to it when you contact the software
manufacturer.

Problems when you turn on the computer

These problems may occur when you turn on the power.

The computer will not start.

Make sure you attached the AC adapter and power cord/cable
properly or installed a charged battery.

Press and hold the power switch for at least 10 seconds.

If you are using the AC adapter, check that the wall outlet is
working by plugging in another device, such as a lamp.

Verify that the computer is on by looking at the on/off
indicator. If the indicator is glowing, the computer is on.

If you are using an AC adapter, verify that the computer is
receiving power from the external power source by looking at
the AC power light. If the indicator is glowing, the computer
is connected to a live external power source.

Summary of Contents for M6-ST3412































































































































































































































































































Search results

Summary of Contents for M6-ST3412

Reviews:

Related manuals for M6-ST3412

Brands by name

Popular brands

Toshiba M6-ST3412, User Manual

Search results

Summary of Contents for M6-ST3412

Reviews:

Related manuals for M6-ST3412

Brands by name

Popular brands