Toshiba JOKC1, Instruction Manual

Page: 23 / 28

3. Mounting the Card and Connecting the Keyboard
11
Connecting the Operator’s Keyboard (UOPK8UE)
Connect the COM1 port connector of the OIS-DS main unit and the connector CN2 of the
operator’s keyboard control card (JOKC1) mounted on the PCI expansion slot with the
accompanying specialized cable. Connect the operator’s keyboard (UOPK8UE) and the
connector CN1 of the operator’s keyboard control card (JOKC1) with the specialized cable.
Figure 3.3 shows how to connect these cables.
OIS-DS Main Unit
Keyboard Cable
Type : ZCDEWAA
Ordering code : 5X8C0003J01800
Cable length : 1.8 m
To connector CN1
To port
COM1
To connector CN2
RS-232C Cable
Type : ZCDEYAA
Ordering code : 5X8C0003G00300
Cable length : 30 cm
Operator ' s Keyboard
(UOPK8UE)
Remote Operation Key
Main Key
14 13 12 11 10 9 8 7 6 5 4 3 2 1
Figure 3.3 Cabling via JOKC1