Toshiba IP EDGE User Manual Download Page 18

Page: 18 / 242

edge

The Grand Tour

TOSHIBA

IPedge UG 11/11

Layouts

Fixed buttons are laid out differently on the IP5000-series telephones.

The Fixed buttons are described below.

9-line LCD Telephone

10 and 20 Button 4-line LCD Telephones
Fixed buttons are located on either side of the dial pad.

Table 3

Fixed Button Definitions

Button

Definitions

Message (Msg): When Msg LED flashes, press

Msg

to call back the

station or voice mail device that activated the LED. This is the tele-
phone’s [PDN] message waiting button.

Important!

Red LED must be on in order for button to function.

Microphone (Mic/Mute) button toggles between Mic and Mute. When
Mic key is lit, Mute is disabled. When Mic is pressed again and light is
off, Mute is enabled on the microphone in the telephone and the micro-
phone in the handset.

Summary of Contents for IP EDGE



















































































































































































































































Search results

Summary of Contents for IP EDGE

Reviews:

Related manuals for IP EDGE

Brands by name

Popular brands

Toshiba IP EDGE, User Manual

Search results

Summary of Contents for IP EDGE

Reviews:

Related manuals for IP EDGE

Brands by name

Popular brands