background image

91

Installation/Set up

Vie

wing • Listening

and Operation

Recor

ding

Setting up

Other

s

No images are 
displayed.

The colors of 
images are poor.

Cannot display 
images from the 
network camera.

Renewal speed 
of network 
camera images 
is too slow.    
(Part 1) 

Renewal speed 
of network 
camera images 
is too slow.   
(Part 2)

The network 
camera images 
are reversed in 
upside-down.

The iris switch is not set 

properly.

The iris of your lens is 

not adjusted properly. 

Any of the cables are not 

connected properly.

The video monitor is not 

adjusted properly.

Lightings are dim.

The Internet line is busy.

There are not enough 

resources (CPU power, 
RAM).

Picture size is too large.

Picture quality is too 
high.

More than one users are 
accessing the camera at 
the same time. 

Installed the camera in 
wrong way.

Set the iris switch properly for your lens.

Adjust the iris of your lens properly.

Connect the cable properly.

Adjust the video monitor properly.

Brighten the lightings. 

Wait for a little while. Sometimes it takes time to display 

images.

There are the recommended requirements of PC to 

view the images of the network camera.                     
(

 page 12) 

Close all applications other than the network camera 

browser.

The default setting of picture size is QVGA(320x240). 

To increase the speed, select a small image size in 
“Resolution” of “Camera Window.” 

When you lower the image quality in “Quality” of 

“Camera Window,” the renewal speed becomes faster; 
however, the picture quality becomes poor. 

When many users access to the camera at the same 

time, the renewal speed of the image becomes slow. 

Make sure that the camera is installed in right way. 

Adjust the setting to place the “Toshiba” logo in the 
right direction. 

Symptom

Cause

How to Manage

IK-WB02-88-94

2004.10.21, 02:43

91

Summary of Contents for IK-WB02A - PoE Network Camera




















































































































Reviews: