Toshiba GD-1190 Service Manual Download

Page: 9 / 70

GD-1190 SPECIFICATIONS 1 - 4

Receive
functions
system

Receive document
output function

Auto reduction/
divided receive
function

Auto reduction
function

When the reference line number is in the specified
range.

Divided receive
function

When the reference line number exceeds the
specified range.

Polling receive
function (Send request
function)

The remote machine must be provided with polling
function. Communication is allowed with an other
company machine.

Sequential send
request (Polling)
communication

Polling is made to two or more specified destinations.
Number of items of destination registration: Max. 100
items

Remote send

Scanned document data in memory are sent
automatically by send request from the remote
machine.

Protection function

• Check by sender number
• Check by allow number

Print system

Recording paper

Recordable size

A4/8.5 x 11/8.5 x 14

Recording paper
setting

AUTO/TRAY 1/TRAY 2 (When the option installed)
(In AUTO, TRAY1 has priority.) (Default: AUTO)

Paper feed

Paper feed by tray (Excluding multi manual feed)

Recording paper size
detection

The recording paper length is detected. If the size
differs, a paper size error occurs.

Recording paper
empty detection

Detected by a paper pickup error.

Duplex receive

Available only in the duplex function support models.

Transfer function

Receive data are transferred to the registered station.

Number of registered
transfer destination

1 item

Registered telephone
number

40 digits

Local transfer

Countermeasures against an error
• Paper jam
• No toner cartridge
• No toner
• During toner supply
• CRU life
• No recording paper

Telephone
functions
system

Main unit telephone
function

On-hook dial function

Yes

Manual redial function

Max. memory digit

50 digits

Display digits

End 20 digits

Pause function

Yes (Fixed to 2sec)

Pulse/Tone select
function

Yes

External telephone
connection function

Select function by
DTMF

Select number (1 digit) + [**] (0 - 9)

Record table
system

Report list

Report output function

Report select

• TIMER LIST
• ACTIVITY REPORT
• TELEPHONE# LIST
• GROUP LIST
• PASSCODE LIST
• JUNK FAX# LIST
• USER PROGRAM LIST

Recording table auto
print function

Number of items

Auto print for every 50 items of send/receive total.

Communication report
list

Report select

• Send report list
• Receive report list
• Serial broadcast send report list
• Image memory addition

Print status select

• ALWAYS PRINTS
• ERROR ONLY
• NEVER PRINTS

Large item

Middle item

Small item

Sub item

Specifications

ARFX9̲A1E.book 4 ページ２００４年１２月３日金曜日午後４時２２分

Summary of Contents for GD-1190







































































Search results

Summary of Contents for GD-1190

Reviews:

Related manuals for GD-1190

Brands by name

Popular brands

Toshiba GD-1190, Service Manual

Search results

Summary of Contents for GD-1190

Reviews:

Related manuals for GD-1190

Brands by name

Popular brands