January 2001 © TOSHIBA TEC
2 - 9
GD-1060 SPECIFICATIONS•ACCESSORIES•OPTIONS
(1) Discard printing
Func. 15 bit 2 permits selecting between ON and OFF of the option for discard extra.
Func. 15 bit 2 = 0 : OFF
Func. 15 bit 2 = 1 : ON (Default)
Func. 15 bits 6 and 7 allow the discard parameter to be set.
Func. 15 (Default Setting bit 2 = 0, bit 6 = 1, bit 7 = 0)
bit 2
bit 6
bit 7
Discard parameter
0
X
X
Discard OFF
1
0
0
0 mm (Discard OFF)
1
1
0
10 mm
1
0
1
17 mm
1
1
1
34 mm
•
When the option for discard extra is ON:
When the length of the received document in the feed direction exceeds the effective recording
area and the part exceeding one page is within the discard parameter, printing takes place with
the exceeding part discarded. When the length of the received document in the feed direction
exceeds the discard parameter range and is within the reduction range of the maximum reduce
ratio, vertical reduction print takes place. When it is not within the reduction range of the maxi-
mum reduce ratio, divided print takes place. The discard extra takes preference over the vertical
reduction print.
•
When the option for discard extra is OFF:
The vertical reduction takes preference without performing discard extra print.
Rcv. doc.
Rcd. paper
A
B
A
A: Effective recording area
B: Record data length outside
effective recording area
If the length of B is less than the set discard parameter, B is discarded.
