Toshiba GD-1060 Service Manual Download

Page: 34 / 93

January 2001 © TOSHIBA TEC

3 - 11

GD-1060 GENERAL

22. START key

Press this key to start scanning of the originals to the memory or direct TX.

23. Dial keypad

Use these keys to enter telephone/facsimile number or to set the ID number, etc.

24. SET key

Use this key to accept the data that you have entered in the PROGRAM mode or Added Feature.

25. CANCEL key

Use this key to return to a previous menu in the PROGRAM mode or COMM option.

26. IMAGE MODE key and IMAGE MODE Lamps

Selects the desired image mode (TEXT, TEXT/PHOTO and PHOTO) for transmission.

A selected image mode lamp is illuminated.

27. FINISHING key

This key is not used in the FAX mode.

28. ZOOM key

This key is not used in the FAX mode.

29. PAPER SUPPLY key

This key is not used in the FAX mode.

30. LIGHT/DARK key

Use this key to specify the scanning density.

Summary of Contents for GD-1060






























































































Search results

Summary of Contents for GD-1060

Reviews:

Related manuals for GD-1060

Brands by name

Popular brands

Toshiba GD-1060, Service Manual

Search results

Summary of Contents for GD-1060

Reviews:

Related manuals for GD-1060

Brands by name

Popular brands