manualshive.com logo in svg

Toshiba GD-1060, Service Manual

Share
Download
Toshiba GD-1060 Service Manual Download Page 45

January 2001 © TOSHIBA TEC

4 - 7

GD-1060 DIALING AND COMMUNICATION PROCEDURE

NSF

Non-Standard Facility

Informs that the receiving station (machine) has a non-standard facility (i.e., HS/ECM, etc.).

NSC

Non-Standard Facility Command

Commands to transmit with the non-standard facility which is selected corresponding to

NSF (i.e., Polling etc.).

NSS

Non-Standard Facility Set-up

Commands to transmit with the non-standard facility which is selected corresponding to

NSF or NSC.

CSI

Called Station Identification

Provides the telephone number of the called station.  Used to check the identity of the called

station.

CIG

Calling Station Identification

Provides the telephone number of the calling station.  Used to check the identity of the

calling station (Polling, etc.).

TSI

Transmitting Station Identification

Provides the telephone number of transmitting station.  Used to check the identity of the

transmission station.

DIS

Digital Identification Signal

Informs that the receiving station (machine) has a standard facility (G3/G2).

DTC

Digital Transmit Command

Commands to transmit with the standard facility which is selected corresponding to DIS

(i.e., Polling, etc.).

DCS

Digital Command Signal

Commands to transmit with the standard facility which is selected corresponding to DIS or

DTC.

CFR

Confirmation to Receive

Informs that the facsimile is in the receivable status.

FTT

Failure to Train

Informs that the TCF signal has not received correctly and requests re-training.

EOM

End of Message

Informs that a document has been transmitted and another document is loaded; commands

to return to the beginning of phase B.

MPS

Multi-page Signal

Informs that a document has been transmitted and another document is loaded; commands

to return to the beginning of phase C.

EOP

End of Procedure

Informs that a document has been transmitted and no additional documents are loaded.

4.2.2.2  Binary signals

Summary of Contents for GD-1060






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands