E6581741
- 13 -
3.2.3.
Network error detection (
c100
-
c103
,
c523
)
▼
Display of trip information
err8
(Optional unit fault 1: 1BH): Network error stop
▼
Related parameter
Title Function
Setting
range
Description
c100
Communication error
detection delay time
0.0-100.0 sec
The waiting time from when a network error occurs
can be adjusted. If a network error continues past
the time set in
c100
, it is recognized as a
communication error and the operation of the
inverter follows the setting of
c101
.
When normal communication returns during the
setting time, a communication error is not displayed
and operation is continued.
*The case of Modbus
®
TCP protocol
The time-out detection time provides by
c523
parameter.
Disconnection detection time =
c523
(Time out) +
c100
(
Communication error detection delay time
)
*The case of EtherNet/IP
TM
protocol
-At I/O scanning and connected communication
Time-out time =
RPI 4 2
Connection Timeout Multiplier
[
μ
s] +
c100
(communication error detection delay time) [0.1s]
RPI: Request Packet Interval
-
At Unconnected communication
Time-out is not operating.
c101
Inverter operation at the
communications loss action
0-5
The operation of the inverter when the
communication fault occurs can be specified.
c102
Preset speed operation
selection
1-15
The operation frequency of the inverter when the
communication fault occurs can be specified. (Only
when
c101
is set to 5)
c103
Communication time-out
condition selection
0-2
Select the communication time-out condition.
c523
Time out
0.0: Disable
0.5 - 60 sec.
The waiting time from the occurrence of the
network error to detection can be adjusted.
* When you are using unconnected communication
of the EtherNet/IP protocol, time-out is not
detected.
