Toshiba e-Studio2505, User Manual

Page: 30 / 116

2 COPY FUNCTIONS
28 Basic Copy Procedure
y Placing originals on the Automatic Document Feeder
1) Align all the originals.
2) Place them face up and align the side guides to the original length.
y The top sheet of the originals will be scanned first.
y Do not load more than 50 originals (80 g/m
2
, 20 lb. Bond) at once, and make sure the thickness of the stack
of originals does not exceed 9.5 mm regardless of their size.
y When placing long originals (A3, B4, A4-R, LD, LG, COMP, or 8K), open the original holder so that the size
of the original can be detected correctly.
y To prevent long originals (A3, B4, A4-R, LD, LG, COMP, or 8K) from sliding out when, extend the paper exit
stopper and raise the sub-stopper. When you have finished using the stopper, lift it slightly and slide it back
in.
1
2