Toshiba e-studio247CS User Manual Download

Page: 29 / 84

- 29 -

Unpacking and Installing the Machine

(2)

Carefully place each of the four

image drum cartridges in the

machine.

Label

(3)

Close the top cover.

Top Cover

(4)

Return the document holder to

its original position.

Note

•

If the operator panel display continues to show

that the toner needs replacing, check that the

lever of each toner cartridge has been fully

turned in the direction of the arrow.

Load paper in the drawer cassette.

(1)

Open the drawer cassette.

(2)

Adjust the paper stop and paper

guide to match the paper size.

Paper Guide

Plate

Paper Stop

Paper

Guide

Note

•

Squeeze the paper stop to adjust its position.

•

Do not remove the cork that is attached to the

plate.

(3)

Flex the stack of paper back and

forth a few times. Then, make a

neat stack by straightening its

edges against a level surface.

Note

•

Using paper that is not recommended may

cause the machine to malfunction.

For details about paper, see

"Supported Paper"

(P.55)

Summary of Contents for e-studio247CS




















































































Search results

Summary of Contents for e-studio247CS

Reviews:

Related manuals for e-studio247CS

Brands by name

Popular brands

Toshiba e-studio247CS, User Manual

Search results

Summary of Contents for e-studio247CS

Reviews:

Related manuals for e-studio247CS

Brands by name

Popular brands