manualshive.com logo in svg

Toshiba E-Studio167, Operator'S Manual

Share
Download
Toshiba E-Studio167 Operator'S Manual Download Page 57

Placing Originals    55

3

Lower the Platen Cover (optional) or the Reversing Automatic Doc-
ument Feeder (optional) / Automatic Document Feeder (optional) 
carefully.

y

Do not try to lower the Platen Cover (optional) or the Reversing Automatic Document 
Feeder (optional) / Automatic Document Feeder (optional) forcibly when the original 
is very thick. There will be no problem in copying even if they are not fully lowered.

y

Do not look fully at the original glass since intensive light may leak out during copy-
ing.

Using Reversing Automatic Document Feeder (optional) / Automatic 
Document Feeder (optional)

When a stack of originals are placed on the Reversing Automatic Document Feeder (optional) / 
Automatic Document Feeder (optional), the originals are automatically scanned one by one. The 
following types of originals are available

 *1

:

*1 To scan 2-sided originals, the Reversing Automatic Document Feeder (optional) is required.

y

Some media types may not be used.

y

The maximum number of sheets acceptable varies depending on the media types of the 
originals.

y

ST size originals must be placed in a landscape direction.

y

Sizes which the Reversing Automatic Document Feeder (optional) / Automatic Document 
Feeder (optional) can detect automatically are LD, LG, LT, LT-R, COMP and ST-R. (The 
equipment detects the COMP size original automatically only when the mixed-size copying 
mode is used.)

Precautions for Reversing Automatic Document Feeder 
(optional) / Automatic Document Feeder (optional)

Do not use the following types of original since such types may cause a paper jam or damage to 
the equipment:

y

Extremely wrinkled, folded or curled ones

y

Ones with carbon paper

y

Taped, pasted or cut-out ones

y

Clipped or stapled ones

y

Ones with holes or tears

y

Damp ones

y

Overhead transparencies or tracing paper

y

Coating paper (e.g. coated with wax)

y

Ones with many holes punched (e.g. loose leaf paper)

Media types

Maximum size

Maximum number of 

sheets acceptable

Paper weight

Plain paper

11.69" x 17.01"

100 sheets 
(or stack height 0.62")

13.3 - 33.8 lb.

Summary of Contents for E-Studio167



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands