manualshive.com logo in svg

Toshiba E-Studio167, Operator'S Manual

Share
Download
Toshiba E-Studio167 Operator'S Manual Download Page 23

General Precautions    21

y

Use the antiskid devices to fix the equipment when the Paper Feed Pedestal is installed.
Under the Paper Feed Pedestal (optional), there are 4 antiskid devices and 2 stoppers to 
prevent its falling. When moving this equipment, turn them in the direction of the arrows (see 
the figures below) and raise them to release the equipment. After it has been moved, be sure 
to turn them in the opposite direction and lower them to fix it back in place.

y

Lock the casters to fix the Desk.
The Desk (optional) has casters underneath. Before moving the Desk, raise the caster lock 
to release it. After moving the Desk, be sure to lower the lock to fix it in place.

Do not install the equipment by yourself or try to move it once it has been installed.

This could result in an injury or damage to the device. Contact your service representative if 
the equipment needs to be installed or moved.

Adjusters

Safety stoppers

Summary of Contents for E-Studio167



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands