Toshiba e-studio 202L Printing Manual Download Page 315

Page: 315 / 398

Printing from Application on Mac OS 8.6 to 9.x 315

Middle Right (Portrait)/Middle Bottom (Landscape)

— Select this to staple double in

the right for the portrait document, or in the bottom for the landscape document.

Lower Right (Portrait)/Lower Left (Landscape)

— Select this to staple in the lower

right for the portrait document, or in the lower left for the landscape document.

Middle Top (Portrait)/Middle Right (Landscape)

— Select this to staple double in the

top for the portrait document, or in the right for the landscape document.

Middle Bottom (Portrait)/Middle Left (Landscape)

— Select this to staple double in the

bottom for the portrait document, or in the left for the landscape document.

This option cannot be selected if a finisher is not installed.

Summary of Contents for e-studio 202L















































































































































































































































































































































































































Search results

Summary of Contents for e-studio 202L

Reviews:

Toshiba e-studio 202L, Printing Manual, Page: 315 / 398

Search results

Summary of Contents for e-studio 202L

Reviews: