Home
/
Toshiba
/
e-studio 202L
/
Printing Manual

Toshiba e-studio 202L, Printing Manual, Page: 119 / 398

Share

Page: 119 / 398

Toshiba e-studio 202L Printing Manual Download Page 119

Installing Client Software for Novell Printing 119

10

Change the name if desired, select whether you are using this
printer as a default printer, and click [Next].

11

Select “Yes” to print a test page and click [Finish].

12

Make sure a test page is printed successfully and click [Yes] to
close the dialog box.

13

The printer driver is installed and the print queue window appears.

Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.

P.206 “Before Using the Printer Driver”

«
...
117
118
119
120
121
...
»

Summary of Contents for e-studio 202L















































































































































































































































































































































































































Reviews:

No comments