manualshive.com logo in svg

Toshiba e-studio 202L, Printing Manual, Page: 169 / 398

Share
Download
Toshiba e-studio 202L Printing Manual Download Page 169

Installing the Printer on Mac OS 8.6/9.x    169

1

Start the Desktop Printer Utility.

y

The folder containing the Desktop Printer Utility differs depending on the Mac OS ver-
sion.  If you cannot locate the Desktop Printer Utility, search it in the boot disk.

y

The New Desktop Printer dialog box appears.

2

Make sure “LaserWriter 8” is selected in the “With” drop down 
menu, select “Printer (LPR)” and click [OK].

y

The Macintosh LPR Printer Selection dialog box opens.

3

Click [Change...] in the PostScript Printer Description (PPD) File 
area.

y

The Select a PostScript Printer Description File dialog box appears.

4

Select the PPD file (TOSHIBA_e-ST450_452Srs or TOSHIBA_e-
ST280_282Srs) for the equipment and click [Select].

Summary of Contents for e-studio 202L















































































































































































































































































































































































































Reviews:

No comments