Toshiba e-studio 166 Operator'S Manual Download Page 46

Page: 46 / 116

2 HOW TO MAKE COPIES

44 Placing Originals

Placing booklet-type originals such as books or catalogues

Place a book-type original on the original glass.

Do not place heavy objects (4 kg or more) and do not press on it with force.

Breaking the glass could injure you.

Raise the Platen Cover or the Automatic Document Feeder
(optional).

Open the desired page of the original and place it face down.
Align it against the left rear corner of the glass.

Lower the Platen Cover or the Automatic Document Feeder
(optional) carefully.

Do not try to lower the Platen Cover or the Automatic Document Feeder (optional)
forcibly when the original is very thick. There will be no problem in copying even if
they are not fully lowered.

Do not look fully at the original glass since intensive light may leak out during copy-
ing.

Summary of Contents for e-studio 166





















































































































Search results

Summary of Contents for e-studio 166

Reviews:

Related manuals for e-studio 166

Brands by name

Popular brands

Toshiba e-studio 166, Operator'S Manual

Search results

Summary of Contents for e-studio 166

Reviews:

Related manuals for e-studio 166

Brands by name

Popular brands