Toshiba e-studio 166 Operator'S Manual Download Page 67

Page: 67 / 116

Zooming In/Out Copy Image 65

Place paper in the drawer.

Press the [COPY] button several times until the lamp of the desired
paper size is lit.

e.g.) Selecting A4 size

You can select the desired paper size with the [DRAWER] button in the same procedure.

Press the APS/AMS selecting button until the AMS lamp is lit.

Place the original on the Automatic Document Feeder (optional).

The equipment detects the size of the original, and then the most suitable reproduction
ratio to the copy paper size is set.

Select the other copy modes as required, and then press the
[START] button.

If the [FUNCTION CLEAR] lamp is blinking and copying stops

The direction of the original placed is not correct. Press the [FUNCTION CLEAR] button to exit
the original. Then rotate the original by 90 degrees to place it in the correct direction.

Summary of Contents for e-studio 166





















































































































Search results

Summary of Contents for e-studio 166

Reviews:

Related manuals for e-studio 166

Brands by name

Popular brands

Toshiba e-studio 166, Operator'S Manual

Search results

Summary of Contents for e-studio 166

Reviews:

Related manuals for e-studio 166

Brands by name

Popular brands