53
EN
53
EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
TIMER RECORDING
Hints for Timer Recording
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
When the starting time is the same:
A program set previously (PROG. A) has priority.
The first 2 minutes (at the longest) will be cut off.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. A
PROG. C
PROG. B
PROG. C
When the starting time and the ending time
for each programs are different:
A program that has earlier start time has priority.
The first 2 minutes (at the longest) will be cut off.
PROG. A
PROG. B
actual
recording
PROG.B
PROG.A
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to
be recorded.
The first 2 minutes (at the longest) will be cut off.
PROG. A
PROG. B
actual
recording
PROG. B
When the recording time is entirely overlapped:
PROG.A will not be recorded.
This unit records the programs according to priority if the timer programmings are overlapped. The timer
programming set previously has priority.
A timer recording of lower priority will be canceled or start from the middle.
Check the overlapped timer programmings and change the priority if necessary.
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer
programming will be lost.
• If a disc is not inserted or if a inserted disc is not recordable (finalized DVD-RW/-R, finalized DVD+RW, a fully recorded
disc, etc.),
flashes and timer recording cannot be performed. In some cases,
will appear momentarily around the
start point as the unit attempts to record. Please insert a recordable disc.
• When all the timer recording is completed,
flashes. To play back or eject the recorded disc, press
[I/
y
ON/STANDBY]
first, then select the recorded title and press
[PLAY
B
],
or
[OPEN/CLOSE
A
]
to remove the disc.
• During timer recording or timer standby mode (
will appear), any operations on the unit will not be available. To make
these operations available, press
[
C
STOP]
or
[STOP
C
]
to stop the timer recording or
[I/
y
ON/STANDBY]
to cancel
timer standby mode (
will disappear).
• To cancel the timer standby mode, press
[I/
y
ON/STANDBY]
.
• When the starting and the ending time are the same, “Exceeds 12 hours” appears and the program setting will not be
accepted.
• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted.
• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you
turn the unit into the standby mode.
• The timer recording for digital TV cannot record any audio language other than default audio.
• “Press ON/STANDBY for timer recording” will appear on the TV screen 5 minutes before the programmed starting
time.
The Priority of Overlapped Settings
Note for DVD recording
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minutes or more, this
program will be displayed with errors number E40 in the
timer programming list.
PROG. A
PROG. B
actual
recording
The first 2 minutes (at the longest) will be cut off.
PROG. B
PROG. A
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
E7SC0UD̲D-R570KU̲EN̲v1.1.indd 53
E7SC0UD̲D-R570KU̲EN̲v1.1.indd 53
2009/04/06 11:17:32
2009/04/06 11:17:32