Toshiba DP-SW25T, Owner'S Manual

Page: 30 / 37

59
Operations
58
Setting up the projector using a Web browser
■
How to use the “Projector Configuration Tool”
The “ Projector Configuration Tool ” uses the Web server features of the projector to
set up the projector using a wireless LAN PC card.
When using the “
Projector Configuration Tool ”, set up the wireless LAN connecting
the projector and the computer.
1
See “Checking the projector status”
p.48
to display
information on the screen and write down the IP address.
2
Invoke Internet Explorer.
Internet Explorer Ver. 5.0 or later is recommended. Enable the Javascript functions.
3
In the address bar, enter the IP address
“http://xxx.xxx.xxx.xxx/” recorded in step
1 above.
The Web browser will then display the following page.
Projector name
Projector ID
Menu
Enter the projector
name to be registered.
Note 1: To prevent access from third parties, the projector is restricted to permit access
only from the computer that has been set up for the TCP/IP to have the same
network address as the projector.
Note 2: If you use a proxy server, do not enable the proxy when accessing the above IP
address.
The TCP/IP settings for the projector and computer are required even in the
wireless LAN Ad hoc mode.
4
Select items from the menu on the left.
Setting: Allows you to make various settings on the wireless/card
menu. When
Browser authentication has been set to On ,
access to the setup page requires the input of the password.
Status display: Displays some states of the projector.
Features: Introduces the functions available in wireless/card input
mode.
Projector name: Enter a character string and press the Set button, and it will
be set as the projector name.
Top: Returns you to the top page.
TOSHIBA Projector Site: The browser will display the home page at http://
multimedia.projector-toshiba.com/map.html, providing
projector information. The home page address is subject to
change without notice.
(The Toshiba’s web site can be browsed only when your
computer can access the Internet.)
●
Details on major items
•
Setting
Allows you to make various settings on the wireless/card menu. When Browser authentication
has been set to On , access to the setup page requires the input of the password.
Network: The items available here are equivalent to those in the wireless/card
menu. Note, however, that security items such as “
Remote control ” and
“ Browser authentication ” cannot be set. Entering individual items and
press the Execute button to update their setting.
Slide Show: The items available here are equivalent to those in the wireless/card
menu. Entering individual items and press the
Execute button to update
their setting.
Projector name
Discards what you have entered.
Press this button after entering
the password.
Projector ID