Toshiba DP-SW25T, Owner'S Manual

Page: 28 / 37

55
Operations
54
Using the Wireless Utility (Continued)
3
Select the projector to be operated.
In the Remote Control window, click on the button, and
select the desired projector from the pull-down list.
Only one projector can be selected. (It is not possible to operate
multiple projectors.)
4
Click on the Remote Control window’s buttons.
The function of each button and box is as follows:
Power On : Turns projector power on.
Power Off : Turns projector power off.
Input (box) : Click on the button, and select the desired input from the pull-down
list.
Go : Switches to the input selected in the Input box.
Mute : Cuts off picture and sound. Click again to restore picture and sound.
Freeze : The picture is paused. Click again to release the freeze function.
+/– : Adjust sound volume.
5
To quit, click on the button on the Remote Control
window.
Performing this does not close the Wireless Utility window.
To exit both the Wireless Utility and the Remote Control , click on the button on
the Wireless Utility window.
■
Document camera function
The document camera function is available for the Toshiba LCD data projector TLP-T701/
T721/T501/T521/T521E.
For details, consult your local dealer.
How to use the JPEG Conversion Tool
The JPEG Conversion Tool converts JPEG files not supported by the projector, image files
in other formats, Microsoft
® PowerPoint ® files, and the like into JPEG files supported by the
projector. The JPEG files converted with this tool can be displayed by sending them using
the wireless LAN PC card
p.52 , or saving them on a memory PC card p.42 .
■
Launching the JPEG Conversion Tool
The window shown in the figure to the right appears on the
computer screen.
Drag the Image Quality Settings slider to the left or right to set the
image quality of the file after conversion. Lower values create
smaller files, but lower the image quality. (It is not possible to restore
the quality of an image after it has been lowered.)
■
Converting an image file
This converts JPEG files using compression formats not supported by the projector,
Windows
® metafiles (wmf), and bitmapped files (bmp) into JPEG files.
(1) In the Conversion Method field, select Converting image
file . (Status on launch)
(2) In the File settings field, click on the Browse button for
Original Image File Name .
The Open dialog box appears.
(3) In the Open dialog box:
(a) Specify the location of the file to be converted; and
(b) In the
Files of Type field, click on the button to select
the file format. A list of files of that format appear in the
Open dialog box.
(4) In the Open dialog box, select the file to convert, then click
on the Open button.
(5) In the JPEG Conversion Tool window, in the File
settings field, select Browse for File name after
conversion . The Save As dialog box appears.
(6) In the Save As dialog box:
(a) Specify the location in which to save the converted
file;
(b) Enter a file name of up to 8 characters in the File
Name field; and
(c) Press the Save button.
(7) (a) In the JPEG Conversion Tool , click on the
Conversion button.
(b) A confirmation dialog box opens. Click Yes .
The computer converts the file. When it finishes a
message appears informing you that a
JPEG file
has been created .
(1)
(2)
(5)
(7)-(a)
(1)
(2)
(5)
(7)-(a)
(3)-(b) (3)-(b)
(3)-(a)
(4)
(6)-(b) (6)-(c)
(6)-(a)
(7)-(b) (7)-(b)