INITIAL SETTINGS
2-9
Your unit has three modes for receiving incoming calls and faxes:
• AUTO mode:
Select this mode when you only want to receive faxes on your telephone line. The
unit will automatically answer all calls and receive incoming faxes.
• MANUAL mode:
This is the most convenient mode for receiving phone calls if you have an extension
phone. To have true manual mode, the unit must be set to not answer while in MANUAL
mode (see “Setting the Number of Rings for Manual Reception” on the next page). You
can also receive faxes; however, all calls must first be answered by picking up the
receiver on the extension phone or telephone connected to the same line.
• A.M. mode:
Select this mode when an answering machine is connected to the unit and you
want the answering machine to answer all calls. This allows you to receive both
voice messages and faxes while you are out.
To set the reception mode, press the RECEPTION MODE key until the light next to
the desired mode comes on.
For more information on reception modes, refer to Chapter 4.
AUTO
MANUAL
A.M.
BOOK SEND
RESOLUTION CONTRAST BROADCAST
RECEPTION
MODE
FUNCTION
ENTER
Selecting the Reception Mode
Fax Setup
Summary of Contents for Copier
