2. Engineering
10
2. Engineering
2.1 The Engineering System
Engineering tools can be classified into two types: the control station control logic construction/maintenance
tools and the process tag construction tools for the TOSDIC-CIE DS monitor system, as shown in the tool
system in Figure 2.1.
TOSDIC-CIE DS
Engineering Tool
Station Registration
Station Registration
Control System Tools
PCS-DS Construction
OIS/SVR Construction
DPCS Internal Logic
Construction
DPCS Construction
(Tag Registration)
Monitor System Tools
PCS-DS Engineering Tools
DPCS Builder
OIS-DS Engineering Tools
Files (FD) are passed
Figure 2.1 The TOSDIC-CIE DS Engineering Tool System
To connect DPCS to TOSDIC-CIE DS, reconstruct the system by using the following development tools.
Table 2.1 shows overview of the functions of the Engineering Tools.
1. OIS/SVR Engineering Tool
2. PCS-DS Engineering Tool
3. DPCS Builder
Table 2.1 DPCS Functions of Engineering Tools
Tool Name
Item
Description
OIS/SVR
Engineering Tool
DPCS Station
Registration
Registers the DPCS Station Type to the TOSDIC-CIE DS
system.
DPCS Station/Card
Configuration Registration
Registers the DPCS Station Type and the control card
configuration in DPCS
Process Tag Configuration
Registers DPCS tag names, I/O points, and parameters.
PCS-DS
Engineering Tool
DPCS-to-DPCS
Transmission Registration
Registers the send data definition for data transmission
between DPCS’s or PCS-DS’s and the receive data.
DPCS Builder
Controller Function
Construction
Creates/modifies the DPCS Control Logic.
