�
Monitoring function of remote controller switch
When using the remote controller (Model Name: RBC-AMT32UL), the following monitoring
function can be utilized.
Calling of display
<Contents>
The temperature of each sensor of the remote controller, indoor unit and outdoor unit and the operating
status can be checked by calling the service monitor mode from the remote controller.
<Procedure>
1
Push
TEST
+
CL
buttons simultaneously for 4 seconds or more to call up the service monitor mode.
The service monitor goes on and firstly the temperature of the CODE No.
��
is displayed.
�
1 2 3 4
Returns to normal display
<Operation procedure>
2
4
1
3
SET
TIME
TIMER SET
TEST
FILTER
RESET
TEMP.
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
2
Push
TEMP.
button to change CODE No.
to the CODE No. to be monitored.
For display code, refer to the following table.
�
3
Push
UNIT LOUVER
(left side button) button to change
The sensor temperature of indoor unit or
outdoor unit in its refrigerant line and the
operating status are monitored.
�
4
Push
TEST
button to return the status to the
normal display.
to item to be monitored.
- 48 -
Summary of Contents for Carrier MMU-AP0074HPUL
Page 15: ...2 WIRING DIAGRAM 15 ...
