38
EN
FUNCTION SETUP
Connection Speed
You can set connection speed as your preference.
(The default setting is “Auto”.)
1
Follow steps 1 to 4 in “Connection Test” on
page 36.
2
Use [
K
/
L
] to select “Enable(Custom)”, then
press [ENTER].
3
Use [
K
/
L
] to select “Connection Speed”, then
press [ENTER].
4
Use [
K
/
L
] to select the desired setting, then
press [ENTER].
“Auto”:
Set the appropriate connection speed automatically, in
accordance with your network environment.
5
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
BD-Live Setting
You can limit the Internet access from the BD-Live
functions. (The default setting is “Allow”.)
1
Follow steps 1 to 4 in “Connection Test” on
page 36.
2
Use [
K
/
L
] to select “Enable(Custom)”, then
press [ENTER].
3
Use [
K
/
L
] to select “BD-Live Setting”, then
press [ENTER].
4
Use [
K
/
L
] to select the desired setting, then
press [ENTER].
“Allow”:
Internet access is permitted from all BD-Live contents.
“Limited Allow”:
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates are prohibited.
“Prohibit”:
Internet access is prohibited from all BD-Live contents.
5
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Deactivate all the network connection and settings.
1
Follow steps 1 to 4 in “Connection Test” on
page 36.
2
Use [
K
/
L
] to select “Disable”, then press
[ENTER].
3
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
“10BASE Half”
: Set the connection speed to
“10BASE Half”
.
“10BASE Full”
: Set the connection speed to
“10BASE Full”
.
“100BASE Half”
: Set the connection speed to
“100BASE Half”
.
“100BASE Full”
: Set the connection speed to
“100BASE Full”
.
Note
• Choose a connection speed in accordance with your
network environment.
• The network connection may be disabled depending
on the device, when the settings are changed.
Disable
Note
• The network connection can be reactivated by
setting the network connection to “Enable(Easy)” or
“Enable(Custom)”.
E5RJ0BD_EN.book Page 38 Tuesday, October 20, 2009 3:53 PM
